PE Compression D/U Check Valve Plain (Brass BSP Body)
NEED HELP? CALL 01202 283 660
Information
Technical - MDPE
PE Pressure Pipework Systems
The PPFV mechanical compression range is for use with PE pipework systems in the conveyance of potable water, fluids, and slurries under pressure. MDPE pipes installed with compression fittings are one of the most widely used systems for above and below ground pipework installations. Products are manufactured to the highest quality and approved by recognised testing institutes and certification bodies.
Standards
Individual products are made in accordance with appropriate British & European (EN) Standards. MDPE fittings are produced to ISO 14236, EN12201, DIN 8076, NP45
Quality & Certification
PE pipework products are produced under the ISO 9001 Quality Assurance Management standard, supported with industry recognised approvals and certification such as DWI, DVGW, ACS, NF, WRAS etc. Blue water fittings are DVGW approved.
Material
MDPE products (Body/Nut/Insert) use a high-performance polypropylene copolymer. The split Ring is Acetal (POM), O-Rings Nitrile Rubber (NBR).
The body of the double check valve is made from Brass and is threaded at both ends.
Chemical Resistance
PPFV compression fittings are manufactured from polypropylene with a split ring made from Acetal and have NBR O-rings, being suitable for water.For chemical applications please refer to the appropriate chemical resistance chart.
Colour
MDPE products are made in a blue colour.
Temperature to Pressure Relationship
Fittings/Valves/Pipe are not to be used for hot water and should not exceed 20°C although they will withstand the same temperatures as polyethylene pipe. With increased temperature adjust pressure down, contact us for details.
Price to pay excl. VAT
Price to pay incl. VAT